filename: tfs 500.doc version 1.3 28.04.2006 vi telefilter filter specification tfs 500 1/5 tele filter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.com vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation. measurement condition ambient temperature: 23 c input power level: 0 dbm terminating impedance: * input: 415 ? || -1 pf output: 415 ? || -1 pf external coil: 33 nh characteristics remark: the reference level for the relative attenuation a rel of the tfs 500 is the mi nimum of the pass band attenuat ion. this value is defi ned as the insertion loss a e . the nominal frequency f n is fixed at 500,0 mhz without any toleranc e. the values of relative attenuation a rel are guaranteed for the whole operating temperature range. the frequency shift of t he filter in the operating temperature r ange is included in the production tolerance scheme. d a t a typ. value tolerance / limit insertion loss a e 4,4 db max. 5,0 db (reference level) nominal frequency f n 500,0 mhz passband pb 390 khz f n 0,1 mhz pass band variation 1,3 db max. 2,0 db relative attenuation a rel f n - 100 mhz ? f n - 90 mhz 48 db min. 40 db f n - 90 mhz ? f n - 60 mhz 42 db min. 38 db f n - 60 mhz ? f n - 1 mhz 47 db min. 40 db f n + 1 mhz ? f n + 100 mhz 42 db min. 40 db input power level - max. 10 dbm operating temperature range otr - - 40 c ?+ 85c storage temperature range - - 40 c ... + 85c frequency inversion temperature 41 c temperature coefficient of frequency tc f ** - 0,036 ppm/k 2 *) the terminating impedances depend on paras itics and q-values of matching element s and the board used, and are to be understo od as reference values only. should there be additional ques tions do not hesitate to ask for an applic ation note or contac t our design team. **) ? f c (hz) = tc f (ppm/k 2 ) x (t - t o ) 2 x f to (mhz). generated: checked / approved:
filename: tfs 500.doc version 1.3 28.04.2006 vi telefilter filter specification tfs 500 2/5 tele filter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.com vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation. filter characteristic 496 497 498 499 500 501 502 503 504 505 -60 -50 -40 -30 -20 -10 0 frequency in mhz magnitude in db 499.7 499.8 499.9 500 500.1 500.2 500.3 500.4 -5 -4.5 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 frequency in mhz magnitude in db 499.7 499.8 499.9 500 500.1 500.2 500.3 500.4 0 5 construction and pin connection (all dimensions in mm) date code sq 3, 81 +0,2/-0,1 1 3 7 5 1, 2 max. 0, 6 1, 78 0,1 1,78 2,54 1 2 0 % % d 13 5 7 50 ? test circuit 500 u08 1 input 2 input rf return 3 external coil 4 ground 5 output 6 output rf return 7 ground 8 ground date code: year + week t 2005 u 2006 v 2007 ... 1 5 2, 4, 6, 7, 8 3
filename: tfs 500.doc version 1.3 28.04.2006 vi telefilter filter specification tfs 500 3/5 tele filter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.com vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation. stability characteristics, reliability after the following tests the filter shall meet the whole specification: 1. shock: 500g, 1 ms, half sine wave, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,35 mm or 5 g respecti vely, 1 octave per min, 10 cycles per plan, 3 plans; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 30 min. each / 10 cycles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow): reflow possible: twice max.; for temperature conditions refer to the attac hed "air reflow temperature conditions" on page 4; this filter is rohs compliant (2002/95/eg, 2005/618/eg) packing tape & reel: iec 286 ? 3, with exeption of value for n and minimum bending radius; tape type ii, embossed carrier tape with top cover tape on the upper side; max. pieces of filters peer reel: 3000 reel of empty components at start: min. 300 mm reel of empty components at start including leader: min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao pull off direction pin marker typ date code ko t a c n w 1 w 2 the minimum bending radius is 45 mm. tape (all dimensions in mm) w : 12,00 0,3 po : 4,00 0,1 do : 1,50 +0,1/-0 e : 1,75 0,1 f : 5,50 0,05 g(min) : 0,75 p2 : 2,00 0,05 p1 : 8,00 0,1 d1(min) : 1,50 a o : 4,30 0,1 bo : 4,30 0,1 ct : 9,5 0,1 reel (all dimensions in mm) a : 330 w1 : 12,4 +2/-0 w2(max) : 18,4 n(min) : 50 c : 13,0 +0,5/-0,2
filename: tfs 500.doc version 1.3 28.04.2006 vi telefilter filter specification tfs 500 4/5 tele filter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.com vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation. air reflow temperature conditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/second > 100c between 300 and 600 seconds > 150c between 240 and 500 seconds > 217c between 30 and 150 seconds peak temperature max. 260c time within 5c of actual peak temperature between 10 and 30 seconds cool-down rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds temperature / c time / s max. 260c 217c 10 ... 30 s 30 ... 150 s max. 300 s chip-mount air reflow profile
filename: tfs 500.doc version 1.3 28.04.2006 vi telefilter filter specification tfs 500 5/5 tele filter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.com vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation. history version reason of changes name date 1.0 - generation of development s pecification strehl 10.11.2005 1.1 - add operating temperature range channaa 21.11.2005 - add frequency inversion temperature 1.2 - add typical values martens 23.02.2006 - add filter characteristic - add test circuit - add terminating impedances 1.3 - change from development specification to filter specification alawneh 28.04.2006 - change relative attenuation
|
